Tips on choosing the right sliding miter saw blade

The effectiveness and purpose of your sliding miter greatly depends on the type of saw blade you have for the tool, its compatibility with the miter saw and the cut to be made. Having the correct blade for your saw that fits for the specific cut is a step ahead towards achieving smooth, clean and clear cuts. The woodworking tool market has taken this as an opportunity to invest by availing various types and sizes of saw blades for workers, which can baffle even the most experienced wood worker if they do not understand the basics and the different functions of the saw blade. Read through this article to gain more insight on saw blades.

First of all, you need to understand a few essential things to choosing the correct saw blade. Things like; knowing the type of miter saw in this case sliding miter saw and the type of cuts you will be making using the blade. Do you need a specialize kind of blade or a general purpose blade? What is the power strength and capacity of your sliding miter saw? Are there any manufacturer recommendations? In addition to these questions, understanding the anatomy of saw blades will help you select the most correct and suitable saw blade for your machine.

Essentials of a good saw blade

Tips on choosing the right sliding miter saw blade

Tips on choosing the right sliding miter saw blade

  • Teeth

The number of teeth in a saw goes a long way to the quality and type of cut produced. A blade with many teeth is bound to produce smoother and cleaner cuts while a blade with few teeth tends to remove materials faster. A perfect example is the rip and crosscut blades. A rip blade usually has more teeth than a crosscut blade and is bound to yield smoother cuts. It is important to note that if you settle on a cross cut blade you will have to settle on one that is specially designed for a sliding miter saw as they have a tendency to self feed leaving the stock torn and rugged.

  • Tooth design

The configuration of saw blade teeth impacts a lot on how a cut appears. The shape and arrangement determines how best the blade cuts and work on the saw. Available teeth designs are the alternating beveled teeth, flat topped teeth, combined teeth, triple chip teeth and high alternate top bevel teeth.

  • Hook angle

Hook angle refers to whether the faces of the teeth are tipped forward or backward instead of being in line with the blade center. We have positive hook angled blades and negative hook angled blades. What is the difference? A saw blade with a positive hook angle will have its teeth tipped forward while a saw blade with a negative hook angled will have its teeth tipped backwards away from the rotation direction. Therefore, a blade with a negative hook angle inhibits the feed rate while a blade with a positive hook angle gives room for a faster feed rate. For a sliding miter saw a blade with a negative hook angle is more ideal because it can stop the blade from climbing the working material to prevent any accidental wood cut.

Adding to the above mentioned essentials, the quality of the teeth and the kerfs’ are also important elements of consideration when choosing the right saw blade. Remember the saw blade is the most important feature in the sliding miter saw. After all, no cutting will be done if the saw does not have a blade or a properly functioning one. It is therefore, important to select the miter saw blade that will deliver accurate an precise cutting ability for your effective woodworking task.

The other articles may you concern, as this is by:

Comments

  1. says

    This is really good inotimafrve content. I think you are a gifted writer, dedicated to writing quality content. I hope to come back to continue reading and reviewing this information. Thank you for your dedication.

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>