How to choose the right Miter Saw blade

Having worked with Sliding Miter Saw for ages does not necessarily give you ultimate professionalism, especially when it comes to functionality and operation. Even the best of operators sometimes have challenges with them and experience some dilemma when choosing the best blade. There are many designs and configurations that sometimes it becomes confusing to choose the most ideal one.

How do you ensure that you have chosen the right sliding Miter Saw Blade?

Different types of Sliding Miter Saws bring in the need for difference types of blades. Hence, you ought to exercise care because if you get it all wrong at the beginning, you could be faced with replacement challenges later on. Here is what you should put into consideration:

How to choose the right Miter Saw blade

How to choose the right Miter Saw blade

  • Type of saw

There are different types of saws that will work differently. So, each of them may require a specific blade. However, there are those which may be utilized interchangeably, for example the metal cutting blades. They can be used on almost all types of saws. If you are looking for versatility, you can settle for the type of saw that can accommodate different types of blades. This can help you easily get a replacement whenever you want to replace the blade.

  • The size of the saw.

You must get the right size of the Sliding Miter Saw before you can choose on the blade. However, some people are ignorant enough to an extent of using a blade that is of a different size from the saw. And what are the results? In most cases, the work is not clear or probably rough. This might not be much of an issue to a home user, but a professional should consider this implication before buying a sliding miter saw.

  • Tooth count.

Everyone wants cleaner and finish cuts off their work. It is a fact that a higher tooth count of at least 60 teeth is optimal enough and will provide smooth cuts. However, while there are those who disagree with this opinion, what should guide you is the type of material you are cutting apart from the kind of cut you want to achieve.

  • Tooth configuration and design

This is more or less of tooth geometry that refers to the way the blade’s tooth is being cut. There are several kinds and conflicting theories of tooth geometry, but the most recommended is the Triple Chip Grind (TCG). Manufacturers may advise and or claim otherwise because of the availability of highly specialized tooth shapes that produce specialized, exotic blades.

  • Hook Angles.

Serious considerations of tooth shapes and configurations could easily affect the entire purpose of the blade, hence the hook angle must be taken with a lot of seriousness. Besides, not all materials will work with any hook. A -5 to +7 degree is what is considered a good quality blade. However, harder materials require a negative or no hook at all.

At what point do you change the blade? You need the know-how and patience. You need to use Allen wrench to take out the blade but for the blade’s outer washer, using your hands would be safe enough. For the inner washer, don’t even think of removing it.

Overall, it will not be out of place to say that the blade of a sliding miter saw is the most important piece of the tool. Without the right blade, no cutting activity can be carried out smoothly. It is therefore advise to always keep the blade safe and neat to avoid rust or other things that may reduce its level of efficiency.

The other articles may you concern, as this is by:

Leave a Reply

Your email address will not be published. Required fields are marked *